Sample probes extract a representative portion from a gas or liquid pipeline flow for spot and/or continuous composite sampling. A well-designed probe shall have no dead volume space. Also, it should reduce the required sample volume to limit sample time and ensure a faster response time. Sample probes should be inserted into a process pipeline to 1/3 to 1/2 of the pipeline diameter. This is to ensure a representative sample free of unwanted contaminants that may have collected on the interior pipe wall.
360°KAS designs the optimum product to accommodate your process conditions and piping / nozzle configuration requirements. This includes advise on material of construction, corrosion, shedding, lag time and installation details.
We offer various designs, depending on the requirements. Even more, we offer these devices according to specific standards.
Sample probes can be designed for fixed or retractable mounting, with wafer, flanged or threaded type connection. Different types/designs are available such as:
- Open End
- Small Bore
We offer products for vacuum to high pressure and for cryogenic to high temperature applications with the following codes & standards:
- ASTM D 4057
- ASTM D1265-05
- NACE MR0175 or MR0103 (for H2S applications)
- ASME B16.5 (for flanged versions)
All our probes can be supplied with:
- EEMUA 138 ed.2 or ASME PTC 19.3 -TW 2016 shedding check
- PED 2014/68/EU compliance
- Material Certification 3.1 to EN10204